Solar Panel Calculator for Michigan (MI)

Calculate how many solar panels you need in Michigan, estimated costs after the 30% federal tax credit, payback period, and 25-year savings. Based on 3.6 peak sun hours/day and $0.183/kWh average electricity rate.

Peak Sun Hours
3.6 hrs/day
Avg Rate
$0.183/kWh
Net Metering
Yes (Inflow/Outflow)
Solar Rank
#28/51

☀️ Michigan Solar Panel Calculator

5,464 kWh
400W
100%

Your Michigan Solar System

Panels Needed
159
System Size
63.60 kW
Annual Production
66,856 kWh
Gross Cost
$190,800
Federal ITC (30%)
-$57,240
Net Cost
$133,560
Annual Savings
$12,235/yr
Payback Period
10.9 years
25-Year Savings
$172,308
CO₂ Offset
73.5 tons/yr
Trees Equivalent
1,226/yr

⚠️ Estimates only. Actual costs and production vary. Consult a licensed solar installer. NEC Article 690 compliance required.

Solar System Sizes by Usage in Michigan

Monthly kWhPanelsSystem kWNet CostSavings/yrPayback
500 kWh156.0$12,600$1,15410.9 yrs
750 kWh228.8$18,480$1,69310.9 yrs
1,000 kWh2911.6$24,360$2,23110.9 yrs
1,250 kWh3714.8$31,080$2,84710.9 yrs
1,500 kWh4417.6$36,960$3,38610.9 yrs
2,000 kWh5823.2$48,720$4,46310.9 yrs
2,500 kWh7329.2$61,320$5,61710.9 yrs

Based on 3.6 peak sun hours/day, $0.183/kWh, $3/W install cost, 80% derate. 30% federal ITC applied.

Complete Guide to Solar Panels in Michigan (2026)

Michigan receives an average of 3.6 peak sun hours per day, where high electricity rates can offset moderate sun hours. With average residential electricity rates of $0.183/kWh, solar offers meaningful savings potential.

Solar Installation Costs in Michigan

The average cost to install solar panels in Michigan is $3.00 per watt before incentives. For a typical 8 kW system, that translates to approximately $24,000 gross, or $16,800 after the 30% federal ITC. Available incentives: Federal ITC (30%).

Net Metering in Michigan

Michigan net metering status: Yes (Inflow/Outflow). Michigan uses an inflow/outflow metering program rather than traditional net metering.

NEC Requirements for Solar in Michigan

All solar installations must comply with NEC Article 690 — Solar PV Systems. Key requirements:

NEC 690.8 — Circuit Sizing: PV conductors must carry at least 125% of maximum circuit current. For a 10A string, conductors must be rated for 12.5A minimum.

NEC 690.12 — Rapid Shutdown: Module-level shutdown must reduce voltage to 80V or less within 30 seconds. Critical for firefighter safety.

NEC 690.31 — Wiring Methods: USE-2 or PV Wire within the array; approved wiring methods (EMT, rigid conduit, MC cable) for building penetrations.

NEC 310.15 — Ampacity Derating: Conductors in conduit must be derated per Table 310.15(B)(3)(a). Account for seasonal temperature variations when sizing conductors. Use our Wire Size Calculator and Derating Calculator for proper sizing.

Solar Wire Sizing for Michigan

Panel strings to combiner box: Typically 10 AWG USE-2 or PV Wire for runs up to 100 feet. Use our Solar Wire Size Calculator to verify.

DC main run to inverter: Usually 6 AWG or 4 AWG THWN-2 in conduit. Keep DC voltage drop under 1.5% with our Voltage Drop Calculator.

AC from inverter to panel: A 7.6kW inverter on 240V draws ~32A, requiring a 40A breaker and 8 AWG copper minimum. Verify with our Breaker Size Calculator.

Environmental Impact

A 63.60 kW system in Michigan offsets approximately 73.5 metric tons of CO₂ per year, equivalent to planting 1,226 trees annually. Michigan grid carbon intensity: 1.1 lbs CO₂/kWh.

Disclaimer: Estimates only. Actual costs and production vary by roof orientation, shading, installer, and equipment. Consult a licensed solar installer in Michigan. NEC Article 690 compliance required for all installations.

Frequently Asked Questions

Top 10 Solar States Comparison

RankStateSun HoursRateCost/Watt
#1California5.8$0.267$2.82
#2Hawaii5.2$0.387$3.35
#2Texas5.3$0.134$2.6
#3Arizona6.5$0.134$2.55
#4Florida5.5$0.145$2.6
#5Nevada6.2$0.127$2.55
#6Massachusetts3.8$0.268$3.2
#7New Jersey4.2$0.175$2.9
#8New Mexico6.2$0.137$2.75
#9Colorado5.5$0.148$2.9

See also: Electricity Cost in Michigan